The building block of your PC is the motherboard which hosts the rest of the components thus connecting them so they perform without any problem! If you’re looking for the best motherboard for i7 12700K then you have landed in the right place as I will be giving you a list of motherboards that will help you draw the maximum performance out of the top mid-high-end 12th Gen (Alder Lake) Intel processor.
The processor itself has got twelve cores and twenty threads which have been mapped out as eight performance cores/ sixteen threads and four efficiency cores and threads, along with a 25 MB L3 cache and support for up to 6200 MHz DDR5 RAM. Since it’s the K variant of the processor, it comes with an unlocked multiplier that lets you crank those processor clocks past the 5 GHz with ease.
It has a TDP of around 125 Watts so you will need a cooling solution that will let you keep the temps down while you extract the juice out of it. However, for that to happen you will need a high-end Z690 motherboard that has all the necessary features that will help you in squeezing every last bit of performance the processor has to offer, mind you it has quite a lot to offer.
|Best Performance Motherboard for i7 12700K ASUS ROG Maximus Z690 Hero Read More||See On Amazon|
|Best Gaming Motherboard for i7 12700K MSI MAG Z690 Tomahawk Wi-Fi D4 Read More||See On Amazon|
|Best Budget Motherboard for i7 12700K ASUS ROG Strix Z690-F Gaming Read More||See On Amazon|
|Best Overall Motherboard for i7 12700K MSI MPG Z690 Carbon D5 Read More||See On Amazon|
|Best Budget Motherboard for i7 12700K Asus Tuf Z690-Plus D4 Read More||See On Amazon|
|Best Cheap Motherboard for i7 12700K Asus Prime Z690-A D5 Read More||See On Amazon|
|Best White Motherboard for i7 12700K ASRock Z690 Steel Legend Read More||See On Amazon|
|Best Overall Motherboard for i7 12700K Gigabyte Z690 Aorus Master D5 Read More||See On Amazon|
The motherboard that you will pair should have support for DDR5, ambient cooling, and a great VRM design for you to choose it. Below is a list that will help you make the right choice as there are a lot of good options in the market right now and it can become quite the hassle to choose from. But fret not the list I am providing it will make choosing the motherboard a piece of cake!
Table of ContentsShow
The 8 Best Motherboard for i7 12700K Reviews
ASUS ROG Maximus Z690 Hero
If you’re looking to buy a high-end motherboard that has everything that you would want in a premium motherboard, then you should look for investing in the ASUS ROG Maximus Z690 Hero which belongs to the ROG product lineup designed for high-end gamers and overclockers.
The board has a form factor of ATX which means there is plenty of space for adding in features that all the PC enthusiasts want in their PC build. The board comes with one of the best power solutions out there with 20+1 power stages, ProCool II power connectors, MicroFine alloy chokes, and premium metallic capacitors so that you can tweak the processor to the max without destabilizing the whole system.
The board also comes with one of the best thermal designs out there and has multiple cooling solutions that work together to keep the temps down in extreme conditions. It has got large VRM heatsinks plus an integrated aluminum I/O cover, a high-conductivity thermal pad, triple M.2 heatsinks, and two M.2 backplates, plus ROG Water-Cooling Zone and ROG Hyper M.2 card with heatsinks that work in perfect synergy to keep the temps down and low.
The DIMM slots can host 128 GB of DDR5 RAM which can be overclocked to 6400 MHz in XMP mode. Other notable features of the motherboard include Onboard WiFi 6E, 2.5 Gb Ethernet, ASUS LANGaurd, AI Overclocking, AI Cooling, AI Networking, Two-Way AI Noise-Cancelation, PCIe 5.0, dual Gen 4 M.2 onboard, ROG Hyper M.2 card with Gen 5 M.2 support, USB 3.2 Gen 2x2 front-panel connector, dual Thunderbolt™ 4 Type-C USB ports making it one of the best motherboards out there that you can pair with a Core i7 12700K.
The board belongs to the ROG product lineup and naturally, Asus delivers the highest quality of products in this series. It comes with a premium look and has great aesthetic value. It comes with a matte black and silver color scheme with the black and white Asus logo and the multi-color ROG logo further making it a more visually pleasing board. You also get Polymer lighting on the I/O cover and you can set a color scheme of your choice through the Asus Aura Sync lighting utility which enhances the visual appearance of your PC so that it looks pleasing to you and everyone else who looks at it.
MSI MAG Z690 Tomahawk Wi-Fi D4
This motherboard is a premium choice for i7-12700K with next-generation connectivity, robust power support, audio boost, and eye-catching aesthetics. It is equipped with a DIY-friendly and reliable build so that PC builder enthusiasts can work with the hardware of their choice.
This motherboard’s advanced 6-layer PCB design ensures lightning-fast data transfer speed and higher bandwidth performance. In addition, it is Double ESD protection certified, which means it is protected against static surges. It is indeed an ultra-durable and stable motherboard.
MSI MAG Z690 Tomahawk WIFI DDR4 also has an aggressive 16+1+1 Duet Rail system. The digital power system, 8+8 pin connectors, digital PMW IC, and 70A smart power stage unleash maximum performance out of your processor. Game Boost features also allow one-second overclocking to boost the gaming performance. It also has advanced core technology, which facilitates CPU overclocking and helps deliver stable output.
Furthermore, it has an extended heatsink design to dissipate heat and run the Intel processor at optimum temperature. MSI MAG Z690 Tomahawk WIFI DDR4 gives users full control of the fan speed and temperature build. Using the BIOS, the users can set 4 temperature targets, and the fans' speed will be adjusted per the targeted temperatures. The FROZR AI cooling automatically manages the system cooling and fan speed.
MSI MAG Z690 Tomahawk WIFI DDR4 features the latest PCI-E Gen 5 slots which can transfer 128GB/s bandwidth, which enables it to support modern games. The PCIe 5.0 slots are reinforced with Surface Mount Technology and Steel Armor for improved protection and higher bandwidth performance. Besides this, the 2.5 G LAN, Wi-Fi 6, and LAN manager enhance network connection and provide a superior online experience.
It integrates audio boost technology too, which provides HD gaming audio. Last but not least, you can find it on Amazon for just $250-260, which is a steal considering all its features. It the best motherboard for i7 12700K especially for overclocking enthusiasts thanks to its durability, aggressive VRM, and latest PCIe 5.0 solution.
ASUS ROG Strix Z690-F Gaming
ASUS is known for producing ultra-reliable, stable, powerful motherboards, and ASUS ROG Strix Z690-F Gaming is no exception. It integrates cutting-edge overclocking technology and heavy-duty cooling solutions that can push any processor to its limit for excellent output performance. It is optimized to handle data-intensive games and long overclocking hours.
Also, it does not lack aesthetics either; with a bright acrylic display, touches of metal coating, and dazzling light patterns, this motherboard is a show-stopper. This motherboard is backed by onboard high-end networking solutions that help transfer data at the speed of light to ensure your game runs smoothly. The Wi-Fi 6E, ASUS LANGUARD, and Intel 2.5 Gb Ethernet deliver ultra-efficient network speed, faster file transfer speed, and low-lag gaming support.
Moreover, ASUS ROG Strix Z690-F Gaming features a Savitech amplifier, Audio Sonic III, and SUPREMEFX support to provide clear audio. The amplified audio cues give the gamers a huge edge over their competitors. It is one of the best motherboard for i7 12700K as it incorporates AI technology and Intelligent controls to optimize the PC. The AI networking, AI-Overclocking, and AI-Cooling run the PC profiles at optimum settings to facilitate it, providing splendid performance under every condition.
The Two-way AI Noise Cancellation also improves in-game communication. In addition, ASUS ROG Strix Z690-F Gaming features PCIe 5.0 slots and DDR5 memory to boost the overclocking strength and further speed up the data transfer to handle AAA titles with heavy graphics. Furthermore, ASUS ROG Strix Z690-F Gaming is equipped with 16+1 power stages, durable alloy chokes, 8+8 power connectors, and high-quality capacitors to power multi-core processors.
The thermal solution of this motherboard is also not lacking in any aspect. It has a VRM heatsink, M.2 heatsinks, thermal pads, and M.2 backplates to drive heat out of the PC built and maintain the temperature during long gaming sessions. The UEFI BIOS is easy to use and helps tweak the PC setting for newcomers and veterans. ASUS ROG Strix Z690-F Gaming is available on Amazon for just $360-$370. It is a top-tier gaming motherboard that can maximize overclocking and memory performance for consistent output delivery.
MSI MPG Z690 Carbon D5
Reasons to Buy
- Solid overclocking performance.
- Five M.2 slots for high-end users.
- Decent pricing.
- A lot of USB ports.
Reasons Not to Buy
- There can be a price cut.
- Ho-hum network features.
MSI MPG Z690 Carbon Wi-Fi is an upper mid-range motherboard because, in the latest generations, many things have been changed, especially the prices of these boards. This motherboard performs good but not great compared to the competitors, but it can be easily standout when done right.
The overclocking and networking of this motherboard seem good to us, but where MPG Z690 Carbon shines is the storage. This board is better than many others, supporting five PCI Express M.2 slots and six SATA slots. This motherboard’s dark theme suits most modern builds and makes it appealing.
There are 20-phase design voltage regulators on this motherboard, of which 18 are dedicated to the processor and 75A MOSFETs for Vcore. The heat sink over the voltage regulators seems small, but they have enough depth to increase the surface area and are connected through a heatsink pipe.
As said earlier, there are five M.2 slots on this motherboard, of which four run at PCIe 4.0 mode while one on PCIe 3.0 mode. Some upper mid-range motherboards offer PCIe 5.0 M.2, but they cost at least five hundred bucks, like Asus Rog Strix Z690-E Gaming, etc, but that’s a lot expensive from it.
There are four memory slots on this motherboard which accept 128 GB of DDR5 memory with data rates up to 6400 MHz. In the BIOS of this motherboard, you will find options to overclock the memory modules and increase their voltage. The options in the BIOS of this board are well-optimized and impressed us.
The IO section of this motherboard comes with an integrated shroud that hides the VRM heatsinks and has RGB elements on MSI Dragon branding. There are USB 3.2 Gen2x2 (20 Gbps), 5x USB 3.2 Gen2 Type-A (10 Gbps), 2x USB 3.2 Gen1 Type-A (5 Gbps) ports, along with a 2.5G ethernet port and BIOS flash button.
This motherboard has three full-length PCIe x16 slots that accept multiple graphics cards but lacks the Nvidia SLI compatibility. The top slot runs at PCIe 5.0 mode and comes with Steel Armor, while the bottom slot runs at PCIe 3.0 mode, and there are no PCIe x1 or x4 slots on this board.
There are a lot of features on this motherboard, but when you compare it with the competition, the price of this board still seems high, and it will be amazing if it comes with a price cut. Overall the specifications of this board are amazing, and we can see it’s the best motherboard for i7 12700K builds.
Asus Tuf Z690-Plus D4
Reasons to Buy
- Reasonable price.
- High durability.
- Great overclocking performance.
- Three M.2 slots for storage drives.
Reasons Not to Buy
- Might not be appealing for some users.
- Only six USB Type-A ports.
One great thing about Asus Tuf Gaming Z690-Plus is that even though it is a DDR4 motherboard, it still performs similarly to the DDR5 motherboards.
You can easily guess from its name that this motherboard uses DDR4 memory instead of DDR5, and you can save some bucks by having it for your i7 12700K.
The low price of this board is interesting for us, but in our tests, we’ve found that this motherboard can easily handle our flagship processor i9 12900K, without any problem.
This board looks much improved from previous generation Tuf series boards with better VRM and more M.2 slots.
This board has four memory slots that accept 128 GB DDR4 memory clocked at 5333 MHz, but most DDR4 motherboards only allow memory overclocking up to 4800 MHz.
When you take off the VRM heat spreaders, you will see 15-phase design voltage regulators configured in 14+1 phases and 80A MOSFETs for Vcore.
Even though it’s a budget motherboard, please don’t get fooled by it because it can easily overclock any high-end Intel Alder Lake processor without any problem.
The VRM heatsink of this board looks small, but it has deep grooves that increase the surface area to get better cooling.
There is an IO cover over the heatsinks, while there are eight USB3 ports on the rear IO, including the Gen2x2 Type-C (20 Gbps) and Gen2 Type-A (10 Gbps) Gen1 Type-A (5 Gbps) ports.
The rear side of this motherboard has only six USB Type-A ports which are not enough for most gamers. On top of the memory slots, there are fan headers and a total of 7x fan headers, 3x ARGB, and 1x RGB headers.
The storage options on this board are quite interesting: four M.2 slots with heat spreaders, all running at PCIe 4.0 mode, and four SATA3 slots. If you are looking for PCIe 5.0 M.2 slots, you need to spend a bit more to get the Asus Rog Strix Z690-E Gaming, as it’s the cheapest offering with those slots.
There are two PCIe x16 slots on this motherboard, where one runs on PCIe x16 5.0 mode while the other on PCIe 4.0 mode.
This motherboard supports AMD Crossfire but lacks the Nvidia SLI support, and also, if you look at most gamers and enthusiasts, you will find that the multiple graphics card trend is dying.
This motherboard has minor performance loss as it uses DDR4 memory instead of DDR5. Overall, it’s one of the best motherboard for i7 12700K but for those making a budget build.
Asus Prime Z690-A D5
Reasons to Buy
- Excellent pricing.
- Great power delivery.
- Four M.2 slots.
Reasons Not to Buy
- No Wi-Fi.
- Few USB & SATA slots.
ASUS Prime series motherboards are well-known for their budget-friendly price and great performance. The one I’ve reviewed and picked for this list is PRIME Z690-A, a high-end motherboard with a white color theme, and it’s a lot cheaper than the MSP MPG Z690 Carbon Wi-Fi.
This motherboard’s beautiful design and color theme make it great for users building a white gaming rig or who don’t want RGB lights in their build. There is a dark theme on the base with lots of shiny silver coloured heat spreaders over it, making it appealing and giving excellent thermals.
There are 16+1 DrMOS phase design voltage regulators which help in overclocking the high-end processors like i7 12700K, but of course, the premium boards offer much better performance. We’ve tested this budget motherboard with our Intel Core i9 12900K, which gave exceptional results.
The overclocking performance of the motherboard is also fantastic, and it uses thick VRM heatsinks for efficient overclocking. There are four M.2 slots on this motherboard, from which three has their heat spreaders while one of them lacks it and all run at PCIe 4.0 mode, and it also has four SATA3 slots.
The I/O features are better than most Z690 motherboards, but you don’t get as many ports and slots as the CARBON WiFi. The rear side of this motherboard has an IO shroud with some RGB elements and USB 3.2 Gen2x2 Type-C, USB 3.2 Gen2 Type-C, 2x USB 3.2 Gen2 Type-A and 4x USB 3.2 Gen1 Type-A ports.
Next to the VRM section, four memory slots on this motherboard support 128 GB of DDR5 memory and have locks on the single side. The memory overclocking on this board is not like the other high-end options listed for DDR5 5000 MHz, one of the lowest values we’ve seen in this chipset.
The bottom left of this motherboard has Realtek ALC1220 codec, which got covered in Crystal sound cover; this controller was available in previous generation flagship entries and is good but not great. There are two full-length PCIe x16 slots which run in PCIe 5.0 and 3.0 modes.
This motherboard’s overall performance and price are great, but the number of USB ports on the rear IO and four SATA slots is insufficient. Also, this board lacks integrated Wi-Fi, but still, I would say if you had a low budget for your build, it would be the best motherboard for i7 12700K in 2022.
ASRock Z690 Steel Legend
Next up on the list is a mid-range motherboard that gives you a great price-to-performance value and doesn’t cost a lot. The ASRock Z690 Steel Legend is a nice recommendation on the list featuring the Z690 chipset which means that you will be able to extract every bit of performance from out of a Core i7 12700K if you pair it with this board.
The board comes with a 13 Phase power delivery solution which will make sure that the processor receives a stable power input so that it doesn’t lack in performance. The 4 DIMM slots on the board are capable of hosting 128 GB of DDR4 RAM which can be overclocked to reach frequencies up to 5333 MHz with the XMP mode.
The board comes with multiple heatsinks on the VRMs and the dual m.2 slots which make sure that the temps stay down while the PC is operational and offers quite low temps due to the large surface area of the heat sinks. Since this is a mid-range board it comes with a decent amount of features such as PCIe 5.0 x16 Slot, ASRock USB 3.2 Gen2, Nichicon 12K Black Caps, 2.5G LAN, an m.2 key for onboard Wifi, ASRock Steel Slot, ASRock Hyper M.2, ASRock Super Alloy, and the ASRock Full Spike Protection for the LAN port and USB ports, making it quite the package.
The board comes in a black and white color scheme with white being the dominant color due to the color of the Heatsinks and they occupy a large area on the board. The black and white form a nice aesthetic look which gives the board a premium feel. To set a color scheme of your choice the Polychrome RGB software utility gives you full control over the color and the effects so that your PC has a pleasing visual outlook.
Gigabyte Z690 Aorus Master D5
Reasons to Buy
- 22 phase power delivery.
- Excellent overclocking.
- Lots of heat spreaders.
Reasons Not to Buy
- Np PCIe 5.0 M.2 slots.
- Previous generation controllers.
Gigabyte has motherboards for every budget in their Aorus product stack, and there comes the Z690 Aorus Master, which we call “the king of all motherboards”. It’s an upper mid-range category with appealing looks but also features the premium hardware to get the maximum out of your i7 12700K.
When I took the motherboard out of the box, I first noticed that the company had completely refreshed its looks compared to the previous generation’s black and orange appearance. There are a lot of heat spreaders on this motherboard with a dark theme, and RGB elements make it appealing. This motherboard has four memory slots that accept 128 GB of DDR5 memory with locks on double sides. Gigabyte lists the speed of memory modules up to 6400 MHz, but it depends on the CPU and memory kits, and we’ve tested this motherboard with slightly lower memory clocks.
It has one USB 3.2 Gen2x2 Type-C (20 Gbps), 1x USB 3.2 Gen2 Type-C (10 Gbps), 5x USB 3.2 Gen2 Type-A (10 Gbps), 4x USB 3.2 Gen1 Type-A ports. As it’s an E-ATX motherboard, there are five M.2 slots with a single heat spreader covering all of the slots and the chipset, while the top slot comes with its dedicated heat sink.
When you take off the VRM heatsinks, you will find 22 phase regulators, of which 19 are dedicated for Vcore and 105A MOSFETs. I’ve reviewed a couple of Z690 motherboards in the past few weeks, and 1,995 Amps were the highest on this motherboard for overclocking a high-end or flagship processor. One thing I’m a fan of on this motherboard is the IO cover, which looks nice and covers the IO section, the VRM heatsinks, and the ports in this section.
There are no PCIe 5.0 M.2 slots on this motherboard, but all run on PCIe 4.0 mode except one, which uses PCIe 3.0 mode. The top PCIe x16 slot on this motherboard is fed through the processor and uses the PCIe 5.0 mode, while the bottom slot sources its lanes from the chipset and runs on PCIe 3.0 mode.
This motherboard is compatible with AMD Crossfire, which can accept multiple graphics card configurations. The overall features and performance make it the best motherboard for i7 12700K, but if you want similar features with PCIe 5.0 M.2 slot, you may need to look for other options like Asus Rog Strix Z690-E Gaming, etc. Also, I’ve noticed that this motherboard uses the previous generation’s controllers.
Best Motherboard for i7 12700K Buying Guide
Even though Intel Core i7-12700K is not the fastest processor of the current generation, it is powerful enough that you will have a hard time selecting a suitable motherboard for this processor. For this reason, we have written this buying guide for those who want a capable motherboard for their i7-12700K, so let’s take a deep look at the buying guide.
Budget & Pricing
For a processor like Intel Core i7-12700K, the Z690 chipset is a no-brainer. But there are tons of Z690 motherboards on the market, and you would not possibly be able to choose a suitable motherboard if you are unaware of the latest features.
That is why you should first designate your maximum budget so you can fine-tune your search. For most mid-range users, a $250 motherboard is enough, as mid-range Z690 motherboards cost around this mark.
If you are short on budget, you can go for the H670 or B660 motherboard, but you will not be able to overclock the 12700K with these motherboards.
Design & Aesthetics
A great thing about modern motherboards is that they are far better looking than the motherboards a decade ago; however, this has vastly increased the cost of the motherboards as well. You will find RGB lighting in most high-end motherboards, and the build quality of such motherboards is better too.
On the other hand, low-end motherboards use small-sized heat sinks and I/O covers, which provide a simplistic look. The motherboard’s color theme is independent of all this, and you will find white-colored motherboards in both low-end and high-end motherboard series.
Voltage Regulator Modules
The biggest reason for buying a K-series processor is to overclock it with a suitable motherboard. It would be a shame if the motherboard is holding back the processor due to low-end power delivery. That is why make sure that the motherboard comes with a high-quality voltage regulator module, which is responsible for powering the processor and RAM.
Thankfully, most Z690 motherboards come with beefy power deliveries, which is why you will have an easy time finding a suitable motherboard.
A great thing about the 600-series Intel chipsets is that they have provided various features that were not present in the previous-generation motherboards. The most prominent of these features are the DDR5 memory and PCI-E 5.0.
Even though these features provide a minimal boost in performance, it would be a good idea to buy a motherboard that supports these features, making your rig a future-proof one.
The I/O features of a motherboard can highly affect the usability of a motherboard, as it is supposed to provide an interface between the user and other components.
High-end motherboards use quality chipsets for I/O, where the most notable mentions are the audio and networking chipsets. Moreover, such motherboards provide more USB ports, PCI-E slots, and M.2 slots. In some cases, you might even get more SATA ports.
So, you should look at the I/O features of a motherboard before finalizing your purchase.
How to Pick the Best motherboard for i7 12700K
Intel Core i7-12700K is not the fastest processor by Intel, but it is surely the best-valued processor right now. You get twelve cores, where eight of them are performance cores, and the other four are efficiency cores, which makes it a marvelous processor. Now, selecting a suitable motherboard for this processor can be a daunting task, as motherboards have gotten complex, and even in a single generation of motherboards, you will see a lot of variations in features.Chipset Selection
The most important specification of a motherboard is its chipset, which defines its capabilities. For Intel Core i7-12700K, there are four mainstream chipsets, namely Z690, H670, B660, and H610.
The Z-series chipset motherboards are the most powerful of them all and can provide the highest number of features. You can also do overclocking on the Z690 motherboard, as long as you own a K-series processor, which 12700K is.
The H670 and B660 motherboards are low-tier motherboards that can support memory overclocking, but you will not be able to do processor overclocking with these motherboards. Moreover, these motherboards provide fewer slots and ports. The H610 is the cheapest chipset of the series and provides only the basic functionalities.
Difference between the Z690, H670, and B660
The technical specifications of these three chipsets can vary a lot, which is why we have listed the basic features of each chipset below.
|Supports processor overclocking||Does not support processor overclocking||Does not support processor overclocking|
|Supports memory overclocking||Supports memory overclocking||Supports memory overclocking|
|Hosts two memory channels||Hosts two memory channels||Hosts two memory channels|
|Supports x8 DMI 4.0||Supports x8 DMI 4.0||Supports x4 DMI 4.0|
|Supports up to 12 PCI-E 4.0 lanes||Supports up to 12 PCI-E 4.0 lanes||Supports up to 6 PCI-E 4.0 lanes|
|Supports up to 16 PCI-E 3.0 lanes||Supports up to 12 PCI-E 3.0 lanes||Supports up to 8 PCI-E 3.0 lanes|
|Supports up to 8 Sata ports||Supports up to 8 Sata ports||Supports up to 4 Sata ports|
|Up to 4 USB 3.2 Gen 2x2 ports||Up to 6 USB 3.2 Gen 2x2 ports||Up to 2 USB 3.2 Gen 2x2 ports|
|Up to 10 USB 3.2 Gen 2x1 ports||Up to 8 USB 3.2 Gen 2x1 ports||Up to 4 USB 3.2 Gen 2x1 ports|
|Up to 10 USB 3.2 Gen 1x1 ports||Up to 4 USB 3.2 Gen 1x1 ports||Up to 6 USB 3.2 Gen 1x1 ports|
|Supports Wi-Fi 6E||Supports Wi-Fi 6E||Does not support Wi-Fi 6E|
Comparison between DDR4 and DDR5
Unlike previous generation processors, the 12th-generation Core i-series processors can support DDR5 memory while not dropping the support for the DDR4 memory too. This means you will have to go with either a DDR4 or a DDR5 motherboard, depending on your use and budget.
The DDR4 memory usually covers 3000 to 4400 MHz frequency, while the DDR5 can go above 6000 MHz. The latency of DDR5 memory kits is higher than the DDR4 kits, but the higher transfer rates overweigh this disadvantage.
Overall, if you are short on budget, it would make no sense to buy a DDR5 motherboard, as you could spend extra on the graphics card or other important components of the setup. However, if money is not the issue, then even the little boost of DDR5 memory is worth it.
Comparison between PCI-E 4.0 and PCI-E 5.0
A new feature of the 600-series chipset motherboards is the PCI-E 5.0. As you might have seen earlier, each new generation of PCI-E provides around 100% improvement in raw bit rate. This time too, the raw bit rate of PCI-E 5.0 has gone up by 100% to 32 GT/s from 16 GT/s found in the PCI-E 4.0. Yet, you will not be able to see a noticeable improvement in the performance because the current-generation SSDs and GPUs cannot saturate the PCI-E 4.0 standard. PCI-E 5.0 can still be a future-proof feature, so you should definitely go for a PCI-E 5.0 motherboard if you can afford it.
I hope the above list has made things more clear for you! I have included all the best motherboards in the market right now from various budget ranges, whether it’s the top end of the value for money! The research is based on facts and figures, and while there are so many good choices, it can be quite difficult.
If you still have problems, here is some final insight, the motherboard should not compromise in the power delivery department, i.e, the VRM ratings. The VRMs are responsible for the power delivery to your processor, and the list includes the best motherboards for the Core i7 12700K processor, which is a powerhouse.
The majority of people only care about the specs of the motherboard, but I recommend that you check out the quality of VRMs and PCB layers so you can determine whether this motherboard will be a good fit or not.
If you still can’t decide and money isn’t a factor, I recommend going for the ASUS ROG Strix Z690-F Gaming motherboard, as it contains all the necessary features you would need to push this beast of a processor to the extreme.
Frequently Asked Questions
What socket is i7-12700K?
The Intel Core I7 12700K is a desktop processor based on Intel’s Alder Lake S architecture and is equipped with the socket 1700. The Intel Core I7 12700K is a desktop processor that is equipped with 12 cores and a total of 20 threads with a maximum turbo frequency of 5.00 GHz
Do you need a new motherboard for i7 12700K?
The Core i7-12700K is the newest desktop processor of Intel. That means it won’t support the old motherboards. That is why you must look and buy a new motherboard for this processor. However, you can also use the old DDR4 RAM sticks with its motherboard.
What motherboard should I get for i7 12700K?
The Intel Core i7 12700K is a very good processor with excellent specifications that will efficiently handle all your tasks and gaming. Also, it would be best if you had a good motherboard to pair with this processor to run smoothly. The MSI MPG Z690 CARBON WiFi is the best motherboard for this beast.