Most workstations and business PCs look similar, but the gaming industry has taken a wide turn in this matter, and now you will find strange-looking cases in the market. The gaming PC market has grown a lot in the past decade, and there are tons of case manufacturers as of now. In this article, we will be reviewing the best case for RTX 3070.
The most common form-factor of gaming cases is mid-tower, although high-end users prefer full-tower cases. Full-tower cases provide better compatibility and can utilize more fans and don’t forget to check out these RTX 3070 motherboard. That is why the cooling performance of full-tower cases is better than most mid-tower cases. However, there are many premium-quality mid-tower cases in the market too.
The GeForce RTX 3070 is a high-end graphics card from the RTX 3000-series graphics cards. The performance of this graphics card is slightly better than RTX 2080 Super, and now that the prices of the latest gen graphics cards have dropped a lot, many users are opting for this GPU. The high TDP of this graphics card makes it essential that you use a well-built case for this graphics card.
|
Corsair 4000D Airflow Read More | See On Amazon |
|
Phanteks Eclipse P400A Read More | See On Amazon |
|
Lian Li Lancool 215 Read More | See On Amazon |
|
Corsair Carbide 275R Read More | See On Amazon |
|
NZXT H510 Read More | See On Amazon |
|
Lian Li Lancool II Mesh Performance Edition Read More | See On Amazon |
|
Corsair iCUE 220T RGB Airflow Read More | See On Amazon |
|
be quiet! Pure Base 500DX Read More | See On Amazon |
When we talk about the design of cases, glass-front cases are commonly used with liquid-cooled PCs, while mesh-front cases are used with air-cooled PCs. As most of the aftermarket RTX 3070 graphics cards roughly consumes around 200 to 250 watts, you should buy an airy casing if you want low thermals. Some popular case manufacturers are Corsair, Thermaltake, Cooler Master, NZXT, Gigabyte, and Lian Li.
Table of ContentsShow
Best Case for RTX 3070 Reviews
The Corsair 4000D Airflow is one of the best cases you can pick right now for your high-performance PC. Being the #1 best-selling PC case on Amazon right now, there are a lot of reasons that justify its popularity. It comes bundled along with features that any PC builder could dream of. A balance of great build quality, aesthetics, thermals, features, and cable management.
This case supports motherboards from mini-ITX up to ATX with seven expansion slots as well as two slots for vertical GPU mounting. As for the front panel fan support, it supports two 140mm fans or three 120mm fans. For the roof, it supports two 120mm/140mm fans only. This means that if you plan on installing an AIO, you can only mount radiators up to 280mm.
For storage, it supports 2x3.5-inch and 2x2.5-inch drives. This case comes with two basic fans included with the case.
Coming to the IO port of the case, it comes with one USB 3.0 Type-A and USB 3.1 Type-C port along with a headphone/microphone jack and the power and reset switch. The Corsair 4000D Airflow offers great GPU and CPU clearance so you wouldn’t have to worry whether your air cooler or GPU would fit or not. The magnetic dust filter is also excellent. The front panel is made of plastic and comes with a mesh to trap dust during air intake.
Building the PC in the 4000D is quite predictable without many difficulties. It offers easy cable management due to its design and included velcro cable strap ties. However, the side panels may be difficult to remove but it’s definitely doable. One thing to seriously take note of is that if you plan on mounting a radiator on the top of the case, the clearance isn’t a lot. So, make sure you attach the header and PSU cables to the motherboard before installing your radiator.
Overall, the Corsair 4000D Airflow is easily the most loveable case with mostly no hindrances of any sort with a reasonable price tag in colors black and white. It offers immensely great airflow with no compromises to aesthetics.
The Phanteks Eclipse P400A is a refresh to the old classic P400. The new front panel mesh design allows greater airflow compared to the classic P400 or P400S. With its competitive price point along with a huge set of features, this chassis is also available in two variants and colors. In either black or white, you have the freedom to choose whether you want to pay extra for the RGB fans or simply just save and get the one without RGB.
The 3x Phanteks D-RGB fans coming with the P400A D-RGB model are controlled by the internal USB motherboard connector or an integrated RGB controller embedded into the front I/O port. The non-RGB variant comes with only two standard fans. The front mesh panel allows great airflow and is also available for purchase separately for your old P400 or P400S.
The P400A includes support from mini ITX up to E-ATX motherboards. It also offers strong support for cable management thanks to the rubber grommets, cable tie points, and velcro straps along with support for up to six 3.5-inch drives and six 2.5-inch drives considering you buy the extra caddies.
The I/O port is quite lackluster, with no changes from the old P400. It has 2x USB 3.0 ports and is quite outdated with no USB 3.1 Type C ports. The PSU shroud is also perforated to allow your PSU to face either up or down as you prefer. There is no support for vertically mounting your GPU, but you can purchase their vertical mounting kit separately.
Do note that you won’t be able to mount a 240mm radiator on the top of the case either if you plan on doing so. But, I personally recommend using a 3-fan radiator fan set up for the front of the case and two fans on the top, and one for the exhaust for ideal balanced airflow.
As far as the value for the case, I’d say it’s a great case for the price point for its heavy feature set but I would probably prefer the Corsair 4000D due to its radiator, vertical mounting support, and Type-C I/O port.
Lian Li Lancool 215 is one of the best budget airflow cases. It comes with an attractive price point without compromising on quality and features. Lian Li has really outdone themselves in the budget case market by releasing this chassis. It features a case with two 200mm addressable RGB fans, an addressable RGB logo, and a regular rear exhaust fan for a steal price of $69.99.
This chassis design layout supports up to an ATX-sized motherboard and also includes rubber grommets and velcro strap ties for neat cable management. At the top of the chassis, the I/O port features two USB 3.0 Type-A ports, a mic-headphone jack, a power and reset switch along with a switch that controls fan RGB which connects to a built-in RGB controller.
The main focus of this case is its massive 200mm ARGB fans. The quality of these fans is decent and runs quite cool but do note that there is no speed control for the fans. It is a great budget case for air cooling but it is not recommended if you are planning to mount a radiator larger than 280mm. This is because you will have to swap out front fans which defeat the primary feature of this budget case.
This doesn’t mean you can’t fit a 360mm radiator in the front though, you certainly can. Alternatively, you can also mount a 240mm or 280mm on the top of the case as well. As for vertical GPU mounting, you would have to purchase a vertical mounting kit from Lian Li separately in order to do so.
Overall, if you are looking for a budget case with great cooling and included fans, the Lancool 215 is an excellent option. However, the deal breakers of this case have to be its lack of a 3.5-inch storage slot, dust filter for the front panel, and front Type-C port. So, if these deficiencies aren’t your concern, it’s definitely a case you can pick up and splurge more budget into other components for your build.
The Corsair Carbide 275R is a solid case choice for those that want a minimalistic, clean design with great water cooling support at a reasonable price point. With an edge-to-edge tempered glass panel, it provides a full view of the PC.
Coming to specifications, this case supports mini ITX, micro-ATX and ATX motherboards with seven expansion slots as well as two vertical expansion slots that are punch-out instead of bracketed. The front I/O panel features two USB 3.0 Type-A ports but lacks any USB 3.1 Type-C ports. It also includes a headphone and microphone jack, an HDD LED, and a power button along with its reset switch. However, if you do not like the HDD LED blinking constantly, you can choose to simply not plug the HDD LED into the motherboard.
This case has versatile options for radiators and fans. You can mount 3x120mm or 2x140mm fans in the front with up to 360mm radiator support for the front panel. The plastic front panel and power supply vent also contain a removable mesh filter that helps filter the air and keep the case relatively clean by preventing dust from entering your PC. As for the top of the case, you can only mount 2x120mm fans or up to 240mm radiators. The rear fan can also be replaced with a 120mm radiator.
The 275R comes with a sufficient amount of storage space for two 3.5-inch drives and four 2.5-inch drives. The case also comes included with two Corsair SP120 fans. As far as cable management is concerned, the 275R features built-in cable routing to help in cable management along with rubber grommets to keep the build looking clean. You also have the option to decide whether you want to tempered glass panels or save money and stick to an acrylic side panel.
Building in the 275R is quite builder-friendly and offers decent airflow. For better airflow, the 275R Flow is a much better pick but it’s great to see Corsair offering a great level of choice.
The NZXT H510 case is one of the most popular PC cases, thanks to its simplistic, sleek, matte design, and is known for its top-of-the-line build quality. Other than its premium build quality, it has a unique removable cable bar design that is quite appealing and helps to conceal cables. This case is an upgrade to the older NZXT H500 and consists of a new addition of a USB Type-C port.
As for the specifications, the NZXT H510 is a mid-tower case that supports mini-ITX, microATX, and ATX motherboards and is considered the middle-sized case compared to NZXT’s bigger H710 and smaller H210 cases.
It supports 2x120mm fans or 2x140mm fans at the front of the case, 1x120mm or 1x140mm fan for the top, and 1x120mm fan for the rear of the case. Radiators can only be mounted at the front of the case of up to 280mm which means you are unable to mount any radiators on the top of the case.
The I/O port is quite simple with one power button, one USB-A port, one USB-C port, and a headset jack. I do appreciate the minimalistic look, but an additional USB-A port would definitely be ideal. It also supports up to 3x3.5-inch drives and 3x2.5-inch drives.
Building the PC, in this case, is rather user-friendly and comes with great cable management, thanks to its concealing cable bar and well designed cable routing. It also features a vertical GPU pass-through that allows wires for easy cable management. It also has dust filters for the front panel and the power supply intake to keep the PC clean.
The H510 may not have the best airflow due to its constricting front panel which does cause it to generate some negative pressure inside the case. Overall, it’s doesn’t have the worse thermals, but if you want more airflow, you can opt for the NZXT H510 Flow.
For a reasonable price of $89, it offers great aesthetics and premium build quality. If thermals aren’t the biggest concern for you, this is the best case you can get your hands on.
The Lancool II Mesh is the revised version of the original Lancool II. This version features a mesh design to allow better airflow hence greater thermal performance. It also offers a lot of fixes for many flaws that existed in the regular Lancool II. For an $89 price tag, it comes with three PWM fans — two 140mm fans for the front panel and one 120mm fan for the rear exhaust. These fans connect to a three-speed fan controller hub that can support up to six 4-pin fans included with the case.
This case supports motherboards from mini-ITX to E-ATX sizes and comes with an adaptive design such as a rotating cable cover to create space for the E-ATX motherboard needed. There is also an HDD tray that sits on a rail that can slide closer to or away from the PSU or radiator to make room for either. This case contains 2 HDD slots behind the motherboard tray and 3 HDD slots in a sliding HDD caddy under the PSU shroud. It also supports 2 SSD drives as well.
240mm radiators or two 120mm fans can be mounted on top of the chassis while the front panel can support up to 280mm and 360mm radiators. However, one thing to note is that there is no dust filter in the front of the case which helps airflow but this in turn allows more dust to enter the chassis. The rubber grommet covering the optional USB-C front port can be slightly unaesthetic, and installing a USB-C front port will cost an extra $15.
This Lancool II features tempered glass panels on both sides which opens with ease due to its door-like hinges. Having the back side panel see-through is questionable due to all the wire management but this issue is tackled with metal covers to cover the clutter and gives a unique vibe.
This case is built to last and feels extremely durable at a great price. However, due to the lack of RGB and bland exterior design, some people might avoid this case.
The Corsair iCUE 220T RGB is one of Corsair’s smart cases with Corsair’s Lighting Node CORE RGB controller that manage the RGB lighting of included triple SP120 RGB PRO fans in the case. It offers an attractive design, despite being a bit squished, a tempered glass side panel, and Corsair’s SP120 RGB PRO fans, all within a $90 price tag. Don’t be fooled, there were some corners cut to be able to sell at this price point.
Firstly, we’ll go on about its specifications. This case supports mini-ITX, microATX, and ATX motherboards with dual 3.5-inch and dual 2.5-inch drive bays for storage. The front of the case supports 3x120mm or 2x140mm fans, while the top of the case supports either two 120mm fans or 140mm fans. The rear exhaust fan only supports a single 120mm fan.
Coming to the front I/O panel, it features two USB 3.0 Type-A ports, headphones, and microphone jacks, as well as a power and reset switch. The biggest downside to this case is that even though Corsair included an RGB controller, it does not control fan speeds. Despite this, airflow and temperatures in this chassis are decent.
As far as clearance is concerned, you may run into issues with RAM and cooling clearance due to the chassis being designed tightly. With the number of cables you will end up with, chances are you will be removing the hard drive cage in order to tidy up the cables. Although, the spec sheet shows that it supports a 240mm on the top of the case, unfortunately, you will not be able to do so due to the lack of sufficient clearance between the cooler and motherboard.
Nevertheless, you are getting a great front panel, tempered glass, and RGB fans that are addressable, it comes with a lot of drawbacks such as clearance issues and a lack of a fan speed controller. So, do tread with caution if you still decide to go with this case.
The be quiet! Pure Base 500DX is a beautiful case that offers a lot of RGB and is easy to build and supports motherboards from mini-ITX to ATX sizes. Due to its $99 price tag, this case fits in the premium end of the budget market. This case comes with two color choices — black and white, with an open mesh front panel.
This chassis comes included with three 140mm be quiet! Pure Wings 2 fans and supports 3x120mm or 2x140mm fans or radiators in the front. The rear supports a 1x120mm or 1x140mm fan and the top of the case supports 2x120mm or 2x140mm fans. However, I do not recommend mounting a 280mm radiator on the top of the case even if it does support it, because you would likely run into space constraints due to its limited space design. This is because some motherboards have huge VRM heat sinks, and that may get in the way of the radiator.
The Pure Base 500DX features space for up to two 3.5-inch drives and five 2.5-inch drives. The front I/O port consists of one USB 3.0 Type-A port, one USB 3.1 Type-C port, a mic, and headphone jack, a power button, and an addressable RGB button that controls the lighting and RGB modes. However, having an extra Type-A port would’ve been ideal. Other than that, it also does not have any vertical expansion slots for vertical GPU mounting.
The case includes two dust filters — one at the bottom of the case, and one behind the front panel. It also features a perforated PSU shroud with cut-outs that offer easy routing for your GPU cables. It also has a lot of space for good cable management along with plenty of velcro straps. The included fans run at 900rpm but are unfortunately not PWM fans and use voltage control for adjusting the fan speed.
Overall, for the price point, features, and included fans, it is a decent, aesthetic case that is easy to build in even for beginners.
