The 13th-generation of Intel Core i-series processors are released in response to the AMD Ryzen 7000-series processors and it looks like the tables have turned this time. Previously, AMD Ryzen processors were available at lower rates compared to Intel Core i-series processors but now, AMD processors cost slightly more and come with fewer cores too. That being said, the multi-core performance of Ryzen processors is still better due to their superior core architecture, so it looks like there will be a tough competition between AMD and Intel processors in this generation. In this article, we will review the best RAM for i7 13700K, so stay seated.

Intel Core i7-13700K is the mainstream high-end processor from the generation and it comes with eight performance cores and eight efficient cores. The performance cores come with Intel Hyper-Threading technology enabled, which is why the thread count of the processor is twenty-four. The Core i7-13700K is the counterpart of Ryzen 9 7900X and the performance of these processors is very similar, although the the i7-13700K is available at a much lower price.

CORSAIR Vengeance DDR5 32GB 5600 MHz C36 Best Value DDR5 RAM For i7 13700K CORSAIR Vengeance DDR5 32GB 5600 MHz C36 Read More See On Amazon
TEAMGROUP T-Force Delta DDR5 32GB 6400MHz CL40 Best High-End DDR5 RAM For i7 13700K TEAMGROUP T-Force Delta DDR5 32GB 6400MHz CL40 Read More See On Amazon
CORSAIR Dominator Platinum DDR5 32GB 5600 MHz C36 Best Corsair DDR5 RAM For i7 13700K CORSAIR Dominator Platinum DDR5 32GB 5600 MHz C36 Read More See On Amazon
G.Skill Trident Z5 RGB DDR5 32GB 6400 MHz CL32 Best Flagship DDR5 RAM For i7 13700K G.Skill Trident Z5 RGB DDR5 32GB 6400 MHz CL32 Read More See On Amazon
Kingston Fury Beast DDR5 32GB 6000 MHz CL40 Best Looking DDR5 RAM For i7 13700K Kingston Fury Beast DDR5 32GB 6000 MHz CL40 Read More See On Amazon

Both AMD and Intel platforms now support DDR5 memory, although Intel processors can also be coupled with DDR4 memory if you buy a motherboard with DDR4 slots. On the other hand, you are bound to run DDR5 memory if you go with the AMD Ryzen 7000-series processors. Also, previous-generation Ryzen processors did not support DDR5 memory at all. 

When we compare DDR4 memory kits with DDR5 memory kits, the first major difference is the difference in clock rates. The clock rates of DDR5 memory kits are much higher and most sticks are clocked at 5000 MHz or higher, going as high as 6400 MHz or even 6600 MHz. The DDR4 memory kits, meanwhile support a maximum clock rate of 5000 MHz, and that too are extremely expensive. On the other hand, the latency of DDR4 memory kits is much better, with DDR4 memory kits usually running at CL16 to CL20, while DDR5 memory kits run at CL32 to CL40.

Table of ContentsShow

The 5 Best RAM for i7 13700K Reviews

Let’s start the list with the Corsair Vengeance 5600MHz DDR5 RAM. It has a low-profile design but comes with a DIMM shell that is there to dissipate heat at a faster rate and add to its aesthetic value. The temps stay down due to the Aluminum shell, but make sure you have adequate cooling on hand.

The timings of the DRAM module are 38-38-84-125 at 1.25V offset. So far, we have seen an average latency of DDR5 RAM to be at CL40 meanwhile this RAM has CL36 which makes it fall under high-profile RAMs that are designed for performance. It also comes with onboard ECC along with eight layers of quality control. Since you can reach clock speeds of 5600 MHz and low latency, you will have an abundance of performance on hand, giving you a premium game experience.

The proprietary iCUE software by Corsair allows you to have complete control over the DRAM module such as the latency, clock speeds, and even customized XMP profiles that you can utilize according to your PC usage. This saves you the trouble of accessing your BIOS every time you want to tweak your system for more performance.

The DRAM module comes in 2 color schemes either black or white and they can be used in the majority of builds out there due to the low-profile design of the module. While the Corsair Vengeance 5600MHz DDR5 RAM scores full marks in the performance department, it doesn’t do so well in the RGB area. So, if you are looking for RGB DDR5 RAM this one isn’t for you. Nonetheless, the price at which it comes, is more than enough to make up for that lack of RGB, and to be honest it isn’t that bad looking, will be a nice fit with builds with a single-color scheme, and of course, it will be a nice pairing with a Core i7 13700K as well.


If you are a performance hog like me and don’t want to sacrifice in the looks department and also have the cash to splash, then I have the product for you! The Teamgroup T-Force Delta RGB DDR5 RAM is a revamp of TeamGroup’s DDR4 variant with the same name. As we are entering the era of DDR5 tech many companies have revamped their existing model to satisfy the tech-hungry PC community who want the best components for their PC builds.

Following a similar design to the DDR4 variant, the DDR5 DRAM module is capable of hitting clock speeds of up to 7200 MHz and comes in a configuration of 16x2 GB. It comes with a heat spreader made of silicon that is capable of dissipating heat at a fast rate so it stays cool. The timings of the DRAM are 40-40-40-84 at 1.35V to give 6400 MT/s when the XMP profile is activated.

Unique features of the DRAM include the SK Hynix chips and an unlocked PMIC that isn’t found in competitor products. For RGB it comes with an RGB diffuser that can sync up with the majority of motherboard RGB software, such as Aura Sync, Mystic Light, RGB Fusion, etc. The diffused RGB lighting gives off a very pleasing aesthetic look which makes your build look more visually pleasing.

In terms of performance, it’s the highest-performing RAM out there when overclocked using the XMP mode. So, if you want the best of the best RAM this is it. Nonetheless, it comes with an expensive price tag to match the performance, so make sure you have the cash ready in the bank. With its capabilities, it will not slow down a processor like a Core i7 13700K and will bring out its full potential.


The Dominator Platinum product lineup has been a resounding success for Corsair is an understatement. To satisfy the tech-hungry customers who want to jump on the DDR5 bandwagon, Corsair has dished out their Dominator RAM series product with DDR5 tech.

The DDR4 variant of the DRAM module was commonly found in high-end PC cases that were built for performance while balancing the aesthetics as well. The DDR5 variant of the DRAM module brings a lot more performance to the table compared to its previous-gen counterpart. The product has been dubbed the Ultimate RGB experience by Corsair.

In terms of performance, the DRAM module is capable of reaching clock speeds of up to 5600 MHz with the XMP mode on. The default clock speed of the module is 4800MHz with CL40 latency. In the XMP mode, the timings can be set to 38-38-38-76, and set the voltage offset of 1.25 for maximum performance. You can further tweak the DRAM module but you won’t get any promising results courtesy of the Micron-A die that has been used to build the RAM.

To control the RAM timings, clock speeds, and RGB you need to use the proprietary iCUE utility that has all the necessary controls in it. The twelve RGB LEDs present on the DRAM module can be controlled by the software individually and you can set a color of your choice on every LED should you choose. The DRAM module also comes with temp sensors onboard which can be monitored via the software utility as well giving you complete control over your RAM performance and its temperatures.

The Corsair Dominator Platinum RGB 5600MHz DDR5 RAM has been launched in two color schemes black and white. Gamers with white cases are quite pleased with the aesthetic value the DRAM module brings to their PC case since it fits right in giving a very sleek and finessed outlook of the PC.

The only downside is that the RAM doesn’t perform in resource-intensive apps as it does in gaming. If you plan to build a gaming PC then this RAM fits right into the mix and it won’t let you down at all. It will end up being paired quite nicely with the Core i7 13700K and help perform at its peak potential.


If you’re looking for RAM that has quality and design that screams Premium, then there is none better than the G.Skill Trident Z5 RGB Series 6400MHz CL32 DDR5 RAM which has one of the highest DDR5 clock speeds with the lowest latency, in the market right now.

DDR5 is a new tech and currently, it’s quite expensive, but that’s not its only drawback. DDR5 RAM modules come with high latencies. The average latency is CL40 which is quite a lot. But the Trident Z is a cut above the market as it comes with lower latency of CL32 and the timings are 32-39-39-102 with a voltage offset of 1.4V to reach clock speeds of up to 6400 MHz which translates to a lot of performance in real-world scenarios. Furthermore, the XMP 3.0 is also supported which is why it is capable of reaching these clock speeds past the 6 GHz mark.

The DRAM module has stood up among its competitors when it comes to benchmark results, especially the AIDA64 benchmark. Even among other benchmark software, the RAM came out on top. You can easily OC the RAM up to 6600 MHz without changing the voltage.

The outlook of the RAM is quite visually pleasing as it comes with a black brushed aluminum finish, which is enhanced by the diffused RGB LEDs present on board. You can control the RGB lighting by using G. Skill’s Trident Z Lighting Control app or you can use your motherboard’s RGB software as well, it syncs up with them all.

This is no doubt the best DDR5 RAM that money can buy right now to pair it up with a Core i7 13700K. But make sure that you have deep pockets as the price tag will blow a hole in them if they aren’t.


As I mentioned earlier that apart from its price the biggest drawback of DDR5 technology RAM is the high Latency. But Kingston who is a veteran in delivering high-performance RAM products to the PC community has succeeded in delivering a low latency DDR5 RAM.

The Kingston Fury Beast 6000MHz DDR5 RAM is a non-RGB DDR5 DRAM module that can reach clock speeds of up to 6000 MHz with timings of 40-40-40-80 and a voltage offset of 1.35V. XMP 3.0 is supported and the high-quality SK Hynix ICs are also present. Overclocking the RAM is quite easy and it was able to hit 6400 MHz without any stability issues.

The metallic heat spreader does a great job of keeping the temps down while adding to the aesthetic look of the DRAM module as well. In benchmarks, the Kingston Fury Beast 6000MHz DDR5 performed quite decently. It was able to sustain read speeds of 93,000 MB/s and write speeds of 83,000 MB/ in the AIDA64 benchmark. In other benchmarking software it performed similarly as well.

When it comes to Gaming performance, it performs up to expectation. However, if you are already using high-Speed DDR4 RAM then the performance gains are minimal at this point since DDR5 is a newer technology and requires some kinks to be filtered out. In A-Titles such as Far Cry 6, while the RAM performed well, the performance gains were minimal when pitched against high-tier DDR4 RAM. This is also because modern titles are more dependent on faster GPUs than faster RAMs.

Still, you can’t take anything away from the Kingston Fury Beast 6000MHz DDR5 RAM as it’s a high-end DDR5 module that will not disappoint you in terms of performance, and also comes with a cheaper price tag as compared to other DRAM modules on the list. There is no RGB on board but Kingston has another RGB variant of the RAM as well which you can get but obviously, it will cost more. It will be a worthy pair alongside the Core i7 13700K and will not bottleneck it in any way.


You Might Like These Too

Mussab Ali
Mussab Ali

I love building gaming rigs and benchmarking games on them. I am a PC builder by day and content writer by night.