The PC community has been quite hyped about AMD’s launch of the Zen 4-based Ryzen 7000 series processors. AMD has delivered on that hype and has given us processors that promise huge performance gains over the previous generation. Naturally, they will need an adequate cooling solution and many are pondering the question of the Best CPU cooler for Ryzen 9 7900X. But fret not we have got you covered even if it’s about the motherboards.
AMD has been losing quite a lot of market share as Intel’s 12th gen Alder Lake processors have dominated the performance benchmarks. With the newer 7000 series processors, AMD has started to take that lost ground back and gone head-to-head with Intel and come out on top once again.
The Ryzen 9 7900X comes in with 12 cores and 24 threads with a base clock of 4.7 GHz and a boost clock of up to 5.6 GHz which just screams performance and it could benefit further with the right choice RAM kit! The processor will be supported by the newer AM5 CPU socket for which you will need to upgrade your motherboard which supports the AM4 socket. The default TDP of the processor has been increased to 170W as compared to the previous gen which had a TDP of 105W. I suppose if you want more performance then you need to increase the power and if you increase the power that means more heat generation.
|
Noctua NH-D15 SE-AM5 Read More | See On Amazon |
|
NZXT Kraken Z73 Read More | See On Amazon |
|
Noctua NH U12-A Chromax Black Read More | See On Amazon |
|
Asus ROG RYUJIN II 360 Read More | See On Amazon |
|
Scythe FUMA 2 Rev.B Read More | See On Amazon |
Since it’s the X variant, it is an unlocked processor which means that you will be able to overclock and tweak it to your heart’s content. But, when you overclock a processor, it generates a lot of heat and may start to throttle if the right cooling solution is not present thermally. This is why we have this list of coolers that are suitable for a processing powerhouse such as the 7900X and we also have it in case of the graphics card too. There are a ton of coolers available, and choosing from them can be quite a hassle. This list will contain all the coolers from all the budget ranges that will make sure that the processor performs at its maximum level and beyond as well.
If you want a guide as to what kind of features that we look out for when choosing these coolers then make sure you visit the buying guide section of the article. We have included coolers that not only perform at the top level but also look good while doing so. Aesthetics are important, we know, that’s why we have included coolers that look pleasing to the eye as well.
Now without waiting any further let’s dive straight into the list and you can then make the right choice for yourself!
Table of ContentsShow
Best CPU Cooler for Ryzen 9 7900X Reviews
Noctua has a history of making excellent CPU air-coolers, the Noctua NH-D15 is among one of the finest air coolers designed and manufactured by Noctua. They have a distinct color scheme with brown and beige accents which may or may not be admired by everyone. With the launch of the AM4 socket previously, Noctua released the NH-15 SE-AM4-AM5 edition which is compatible across AM4 and AM5 socket, making it ideal for Ryzen 7700x processor with its support for the platform.
The Noctua NH-D15 SE-AM5 is basically a dual fan air cooler design with a dual-tower made out of aluminum for dissipating the heat that is absorbed from the CPU block via the six copper heat pipes. This air cooler is equipped with a dual-fan configuration featuring the Noctua NF-A15 140mm fans which use a pull and push configuration for efficient dissipation of heat through the dual-tower heatsink. Drawbacks that may exist in the Noctua NH-D15 SE-AM5 are overshadowed by its enthusiast level cooling while maintaining barely audible levels of noise, making it quite quiet.
Glancing across the specs reveals that the Noctua NH-D15 is 135 mm x 150 mm x 165 mm in terms of its dimensions with a total gross weight of 1320 g with the fans. As previously stated, it is equipped with dual Noctua NF-A15 140 mm PWM fans pushing an airflow of 68 CFM while maintaining noise level of 19.2 dBA only, once again signifying the quietness. Additionally, Noctua provides a warranty of six years which is quite a bargain for such an enthusiast level air cooling solution with its superb build quality.
The Noctua NH-D15 SE comes packaged in a reusable cardboard packaging that contains all the necessary parts in three compartmentalized cardboard boxes within the original cardboard box, including the Noctua’s SecuFirm2 mounting kit and the 2 x NF-AF15 140 mm PWM fans in a separate cardboard box among them. The overall excellent performance provided with low levels of noise and support for the AM5 platform and rams makes it an excellent choice to be paired with Ryzen 9 7700x processor.
NZXT’s Kraken Z73 is among one of their flagships AIO liquid coolers that comes equipped with a trio of performance capable fans with a 7th generation pump. The NZXT Kraken Z73 also comes with an LED display that is capable of showing various statistics such as the CPU temperature, the coolant temperature as well as providing you with the capability to customize logo to match the visuals of the AIO liquid cooler with the rest of your build.
As discussed earlier, the NZXT Kraken Z73 comes equipped with a trio of 120 x 25mm cooling fans that utilize a 4-pin PWM connector. The liquid cooler itself weighs around 1361 grams with support for the AMD sockets ranging from AM2, AM3, AM4 as well as AM5 which is utilized by Ryzen 7900x, making it an ideal choice for the Ryzen 7900x platform. The NZXT Kraken Z73 itself measures as 28.6mm x 120mm x 393.7mm with its pump height measured at 54mm.
One of the cool things about the NZXT Kraken Z73 is that it ships with all the mounting hardware and equipment that is required to seat it above modern processors, eliminating any hassle involved. The 7th generation pump equipped allows for optimal cooling as it allows greater flow of water with greater reliability. In order to manage the software and statistics of the LCD display, a USB 2.0 header to micro USB cable is utilized in order to connect the software of the Kraken Z73 and sync it with the motherboard. In order to make the installation easier, the Kraken Z73 sports a traditional Asetek twist-lock bracket mechanism which allows for an easier mount during the installation. The base of the Z73 is made up of a copper cold plate and has factory thermal paste pre-applied to it.
Additionally, to ease the installation of the liquid cooler, it has 90-degree swivel fittings which allow for the tube of the Kraken Z73 to be adjusted and rotated for different angles during the installation. The corners of the Z73 also have rubber grommets which are aimed at reducing the vibrations and dampening them in order to provide a quiet cooling solution.
Noctua is known as a reliable company when it comes to acquiring the best cooling solutions for your system. The Noctua NH U12-A Chromax black that is being reviewed is based on the Noctua U12-A but completely coated in black and additionally comes with Chromax covers. The Noctua NH U12-A Chrome black is out of the box compatible with the AM4 and AM5 platforms, meaning that it will be compatible with Ryzen 7700x out of the box.
Moving towards the specifications of the Noctua NH U12-A, the dimensions of the cooler without the fan equipped are as of 158mm x 125mm x 58mm where as with the fan equipped, the dimensions being 158mm x 125mm x 112m while weighing 1220 g. Reviewing the build quality of the cooler, it can be seen that the base and the heat-pipes are made of copper where as the cooling fins are made out of aluminium with soldered joints and nickel plating. Noctua uses a system of ‘Noctua’s Standardized Performance Rating’ known as NSPR to rate the performance and efficiency of their coolers. The Noctua NH U12-A Chromax Black is rated at a NSPR of 169, ranked among the top 4 coolers on the Noctua’s website. This effectively means that the Noctua NH U12-A Chromax Black will have no troubles handling a Ryzen 7700x with its TDP of 105 W.
One of the key features of the Noctua U12-A is the fact that it comes equipped with NF-12x25 PWM fans which are 120mm fans but provide the performance of a 140mm fan. It is able to do so with the layout of 7 copper heat pipes and with a 37% more fin surface area that allows it to outperform 140mm sized coolers. Their renowned longevity and reliability is shown by the fact that Noctua offers 6-year manufacturer’s warranty. The Noctua NH U12-A Chromax black is among one of the best CPU air cooling solutions for the Ryzen 7700x.
The Asus ROG Ryujin II 360 AIO liquid cooler is part of the ROG Ryujin lineup which features a 7th generation Asetek pump with greater flow and reliability coupled with a nice sleek 3.5-inch display at the front. Moving towards the specifications itself, the Asus ROG Ryujin II 360 AIO liquid cooler supports both AMD and Intel platforms with support for the AMD AM4 and AM5 socket which makes it an ideal pick for the newer Ryzen 7900x processors.
The water block itself has a rated speed of 4,800 RPM with an air pressure of 3.23 mmH2O and an airflow of 19.41 CFM. The pump itself which was previously discussed as to being a 7th generation Asetek pump has a rated speed of 800-2800 RPM. The radiator on the cooler itself has the dimensions of 394 mm x 121 mm x 27 mm. The liquid cooler itself is powered by a trio of 120mm Noctua F12 PWM fans with an airflow rated at 71.6 CFM. Additionally, another great aspect of this purchase is the fact that ASUS provides a warranty of 6 years.
The Asus ROG Ryujin II 360 AIO liquid cooler ships within a packaging that has shades of black and gray. The packaging includes a controller for the fans and some ARGB headers in order to make cable management side of things easier and hassle free. One of the cons associated with the included controller is the lack of magnetic base which makes it a hassle in the future to reattach it as you’ll need to find new adhesive for it.
Another great aspect of this liquid cooler is that the Asus ROG Ryujin II 360 has a color scheme of black and gray which matches the color scheme of the previous generation of ROG motherboards as well as the current-gen ROG motherboards. The pump block itself has a copper base which already comes pre-applied with a thermal paste compound.
The LCD display itself can be customized using the AIDA64 software or the Armoury crate software and can be used to show custom visualizations or messages. Overall, this is a great liquid cooler to be coupled with a Ryzen 7900x processor mounted on a Asus ROG motherboard for matching the entire theme of the build.
The Scythe FUMA 2 Air cooling solution features a black beefy air-cooling solution with a chunky dual tower heatsink tower that is powered by dual 120mm PWM fans that are capable of producing up to 67 CFM of airflow at their maximum speed. The Scythe FUMA 2 features decent performance with the updated revision featuring cut-outs in the Scythe FUMA 2 which allow for far greater compatibility across high-profile rams such as the Corsair Vengeance RGB Pro series which has issues with some of the air coolers.
The new revision of the Scythe FUMA 2 retains the dual fan configuration with newly added Kaze Flex II 120 mm PWM fans that are capable of producing up to a total of 67 CFM while having a rotational speed of 1500 RPM, an improvement of over 300 RPM as compared to the older revision. The dimensions have changed are now as of the following with a width of 137mm, depth of 129 mm and a height of 155 mm while weighing around 1000 G.
The Scythe FUMA 2 Rev.B is not only affordable but completely compatible with the next generation of CPU such as the Ryzen 7700x and 7900x as it is compatible across AM4 and AM5 platform. It has incredible performance for its price which is inexpensive when compared to other air-cooling solutions.
The acoustics on the new Scythe FUMA 2 are incredible as it operates quietly at the default settings. It may be audible once the Ryzen 9 7900x is overclocked, the fan profiles can be customized in the BIOS to reach a compromise between performance and total quietness. The installation is also rather simple with the mounting system and will fit in any mini-ATX and ATX chassis while looking sleek with the black finish on the cooler itself. The Scythe FUMA 2 Rev.B is recommended to be utilized for Ryzen 9 7900x processor if you’re looking for decent performance while on a budget and are not looking to overclock the processor.
