A case is like a home to the PC components, so it is important to buy a good-quality case for a quality rig. The system’s performance highly depends on the case, as it can cause it to thermal throttle without ample airflow. Many types of cases are available on the market today, but you have to ensure that the case you are buying is suitable for the PC components you have bought. In this article, we will check the best case for RTX 4080, so keep seated.
First of all, check the size of the motherboard you have bought. If you have an E-ATX or ATX motherboard, it is very likely to be incompatible with small-sized mid-tower cases. Few mid-tower cases can support the full-sized motherboards, so you must go with a full-tower case. There are three mainstream form-factor cases: the mini-ITX small-form-factor cases, mid-tower cases, and full-tower cases.
|Lian Li PC-O11DW 011 DYNAMIC Read More||See On Amazon|
|Corsair 5000D Airflow Read More||See On Amazon|
|Rog Strix Helios GX601 Read More||See On Amazon|
|Fractal Design Meshify 2 Read More||See On Amazon|
|be quiet! Dark Base Pro 900 Read More||See On Amazon|
NVIDIA GeForce RTX 4080 is the latest graphics card by the Green Team that falls below the RTX 4090 and has spectacular raw power. The graphics card is based on the Ada Lovelace architecture and comes with 9728 shader processing units. This graphics card has 304 texture mapping units, and 112 render output units. The base clock of the graphics card is much higher than the previous-generation graphics cards, at 2205 MHz, while the boost clock is 2505 MHz.
The graphics card uses GDDR6X memory with a bus width of 256 bits, which leads to a memory bandwidth of 735 GB/s. The graphics card has a high TDP of 320 watts, which makes it similar to the RTX 3080 in power consumption. Overall, the GeForce RTX 4080 provides a massive improvement over the RTX 3080, although it is priced higher as well.
Coming to the case requirement for such a powerful graphics card, you have to make sure that the case provides at least 14 inches of GPU clearance, as many high-end variants of RTX 4080 are longer than 12 inches. Moreover, the height of the graphics cards in this generation is also more than the previous-generation graphics card variants, which is why you have to keep the height in mind as well.
Table of ContentsShow
Best Case for RTX 4080 Reviews
Lian Li has become a household brand when it comes to catering to the whims of the PC enthusiast sector in the PC community. They have established themselves on the scene by giving us a versatile product range that exhibits quality.
Since we are discussing PC cases, I have the Lian Li O11 Dynamic casing for you to start the list. It has been designed by Lian Li collaborating with the German Overclocker Der8auer. The frame is made of aluminum with tempered glass making up the side panels. It is one of the most durable cases out there and is perfect for hosting high-end components that require optimum airflow.
The dimensions of this case are 272mm x 446mm x 445mm. This means that there is ample space for hooking in a water-cooled radiator which has a length of either 120mm, 240mm, or 360mm. All are supported due to its spacious interior. It comes with air vents that help in optimizing the airflow in the case. The tempered glass panels are easily removable which means that cleaning and maintenance won’t pose any problems.
Due to the large amount of space available all form factors motherboards such as EATX, ATX, and MATX, are supported. There is also the option of hooking in multiple storage drives and even a secondary PSU as well. You get dust protection due to the presence of dust filters on the side, top, and bottom of the casing. It’s a dual chamber casing and has a CPU clearance of 155mm and 420mm GPU clearance which means that you will be easily able to hook in an RTX 4080 with space to spare.
The looks of the Lian Li O11 Dynamic make it so that the PC build is from the future and with the optimized airflow and cooling that the casing provides the temperature ranges from 49 to 67 degrees Celsius over ambient temperature. This is made possible by the 120mm fans that you can place on the top or bottom which work with the AIO radiator placed in the extra space in the casing. It is one of the best case for RTX 4080 out there and one of the most durable too.
If you are looking for a good case with good airflow and you don’t want to dedicate a large portion of your budget to your casing then I have the casing just for you, the Corsair 5000D Airflow is a price-to-performance product and it comes with all the right features in the right place to make it a worthy recommendation in the list.
It’s a mid-tower casing that has a tempered glass side panel, and it is quite easy to assemble and disassemble so you will have no problem building your PC. There is a space of 25mm behind the motherboard where you can channel your cables so that the final outlook of your PC is one of a clean look and doesn’t look cluttery or messy. The cable trays are located at the front and back panels which can be easily removed for cable access.
The acoustics on the casing is pretty good and the front panel comes with a mesh filter to offer protection from dust. The dimensions of this case are 520mm x 245mm x 520mm which is why It has enough interior space to hook in 6x120mm fans and 4 x 140mm fans apart from the space where you can fit 360mm or a 240mm AIO cooler at the front side. Since it has such a large interior space it is compatible with all form factors of motherboards such as EATX, ATX, MITX, etc. Corsair has also included 120mm Corsair Airguide fans for maximum airflow which will keep the PC components cooler when running in tweaked conditions.
The build quality is excellent and it comes with a drive cage that can accommodate multiple HDDs and SSDs. The CPU clearance is 170mm and the GPU clearance is 400mm which means that you will be able to hook in an RTX 4080 with no problems whatsoever. It comes in White and Corsair offers a 2-year warranty which should have you covered for a while. Furthermore, it has 7 horizontal expansion slots and 2 vertical slots which should give you the option of hooking in your GPU vertically as well. Overall, a solid case that will last you a while and give you the proper airflow you need for your high-end PC.
When discussing high-end components and giving out recommendations, the list doesn’t feel complete without any mention of Asus’s ROG series product lineup. No matter what it is, PSU, GPU, motherboard, or casing. The ROG series has become a household brand for high-end PC enthusiasts and tweakers.
The ROG Strix Helios is a premium mid-tower chassis that comes with a futuristic design and aesthetics. It contains three tempered glass side panels and a sturdy aluminum frame that will last you for a while. The design is what makes the casing stand out from the competition and is also high in demand. It even comes with ROG-style RGB lighting on the front which can be controlled using the AuraSync software from Asus.
The case has got features such as built-in cable management, a multifunction cover with GPU braces, A PSU shroud, and ample space for hooking in three GPUs horizontally and 2 vertically. It has got 9 storage drive bays and a translucent rear cable cover, as well as an advanced I/O panel with a fan control button, and multiple USB ports including a Type C port.
The dimensions of the Rog Strix Helios GX601 are 250 x 565 x 591 mm which makes it compatible with hosting even the largest motherboard form factor such as the EATX. There is enough space on the front to host a 420mm radiator at the top and a 360mm radiator at the top. The CPU clearance is 190 mm and the GPU clearance in the casing is 450mm which makes it the best case for RTX 4080 and other graphics cards.
It’s one of the best casings out there which can host a pure enthusiast PC build as it has the looks, the space, as well as the airflow to keep the temps down when running in OC mode.
If you want something with the looks and the space, I invite you to consider a casing that belongs to the Fractal product lineup. It’s a mid-tower casing that comes in black and dark tempered glass.
The Meshify 2 is designed for flexibility and expandability. It comes with six HDD/SSD drive bays giving you all the space you would need to incorporate multiple storage drives in your setup. The casing is designed for those PC enthusiasts who want to tweak their hardware and maintain low temps at the same time. It comes with space for 9 fans and you can hook in AIO coolers of 420mm, 360mm, 280mm, and 120mm either at the top, front rear, or bottom of the case.
The motherboard form factors supported are ATX, EATX, MITX, etc. This means that you won’t be limited by your casing when looking for a suitable motherboard that fits your needs. You can install up to 7 expansion cards horizontally and 2 vertically. It has a steel frame with a windowed left side panel with latching mechanisms for easy access.
The Meshify 2 is designed for optimal airflow and it comes with 3 pre-installed fans for maximum airflow which will keep the temps down and low. There is a removable front nylon filter as well which ensures maximum airflow inside the casing. The PSU shroud is also ventilated and can be exposed to the front side radiator to keep the PSU temps down while it is powering up your PC.
The dimensions of the case are 240 x 474 x 542mm and it’s a sturdy case too, coming in at 10.5 KG. With a GPU clearance of 491mm and the rest of the features that it comes with, it will be a perfect fit for a GPU like RTX 4080 and a nice investment for you as well should you go for it.
Be quiet initially started as a company excelling in PSU and fans. But they dove into the casing department back in 2014 and they have established themselves quite firmly in the PC community forming a loyal fanbase in the process as well.
The Dark Base Pro 900 is one of the most modular cases out there as every panel can be removed from the case making it a fan favorite with the PC modders out there. It’s a full tower case that comes with an inverted motherboard layout and LED light that comes preinstalled with the case.
The dimensions of the case are 577 x 243 x 586mm and it can host motherboards of all form factors from the larger EATX to the smaller MITX. Both the front and top of the casing have the length and width to host a large size radiator of up to 420mm. The Airflow channel is a full circuit airflow system making it one of the best cases for RTX 4080 due to the optimal airflow and the ability to keep the temps down and cool in extreme conditions.
The motherboard can be fit on a relocatable tray making it an ideal casing for using the PC as a test bench. This tray is adjustable to three levels or you can just use it in an inverted layout fashion for maximum airflow. The side panel is made up of tempered glass and LEDs giving you access to see the PC components running in their full glory without any visual hindrance.
The front, bottom, and side panels have a removable dust filter for maximum dust protection. There are 10 fan mounting locations in the casing and it comes with 8 expansion slots. The side and top cover consist of Steel and Aluminum making it a sturdy casing that will host your PC components. A Qi charging option is also part of the features that be quiet is giving with this casing.
The CPU cooler clearance is 185mm and the GPU clearance is 472mm which is more than enough for hosting a GPU like the RTX 4080 which is quite large in size. Add a PSU shroud to the mix and a 3-year warranty and you have a solid casing on your hands that will last you for some time and prolong the life of your components due to its cooling capabilities and large interior.